Hallowell 455C18SV-PT Series 400 Commercial KD Combination Cabinet, Safety View Door, Stationary, Unassembled, 36" Width x 18" Depth x 72" Height, Parchment
Fabricate cabinets square, rigid and without warp, with metal faces flat and free from dents or distortion. Weld frame members together to form rigid, one-piece structure. Weld, bolt, or rivet other joints and connections as standard with manufacturer. Grind exposed welds flush. Do not expose bolts or rivet heads on fronts of cabinet doors or frames. All cabinet parts to be cleaned and coated after fabrication with a seven stage zinc/iron phosphate solution to inhibit corrosion, followed by a coat of high grade custom blend powder electrostatically sprayed and baked at 350 degrees F for a minimum of 20 minutes to provide a tough durable finish. Fabricate of 16 gauge (minimum) channels, with integral continuous door stop/strike formed on both latch and hinge side vertical members. Cross frame members of 16 gauge channel shapes shall be securely welded to the vertical framing members to ensure rigidity. Bottom frame member to be not less than 4" high. Right and left doors shall each be fabricated from single sheet prime 22 gauge with single bends at top and bottom and double bends at the sides. Doors shall include a 3" wide 20 gauge full height hat channel door stiffener spot welded to the inner door face. The latching mechanism located in the right hand door shall be a 3-point projecting turn-handle latching mechanism designed to positively engage frame at the top and bottom as well as to the center of the left hand door. The vertical lock rods shall be fabricated from heavy 14 gauge x 1-1/4" wide galvanized steel. Nylon lock rod guides shall be inserted into the upper and lower door flanges of the right hand door insuring proper engagement between the lock rods and locker frame when the door is in the locked position. Locking devise shall include a built-in cylinder key lock. Doors options are solid (non-perforated), safety-view (clear polycarbonate panels - two per door) and ventilated (expanded metal panels - two per door).
Features of Hallowell 455C18SV-PT Series 400 Commercial KD Combination Cabinet, Safety View Door, Stationary, Unassembled, 36" Width x 18" Depth x 72" Height, Parchment
22 gauge body
22 gauge shelves adjust on 2" center
22 gauge door with 16 gauge frame
16 gauge continuous piano hinge (72" high only) concealed hinge pins for wall mount
200 lb shelf capacity (75 lb for 16" and 18" wide, 150 lb for 30" wide)
Warning - California Proposition 65
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
