Some products sold on this website may expose you to chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm, including
wood dust, formaldehyde, and certain lacquers or finishes.
Always follow the included assembly instructions. Ensure all bolts and fittings are
fully tightened before use. Do not exceed the stated maximum weight capacity.
Keep children away during assembly. Inspect hardware periodically and re-tighten as needed.
ℹ️
Material & Finish Notice
Wood tones and fabric colors may vary slightly from images due to natural material
variation and screen calibration. Surface finishes may require periodic maintenance
to preserve appearance and longevity.
Made with care
Great value
Elegant design
Quality materials
Description
Mist Maker Instructions For Initial Use,Be Sure The Input Voltage Marked On The Transformer Must Be Same As Your Local Power Supply. If Not, Please Do Not Use It Until Get A Correct Transformer From Your Local Distributor. Place The Mist Maker Into A Water Container Placidly, And Pour Into Enough Clean Water.If The Water Is Not Enough To Submerge The Water-Lever Sensor Switch, It Can Not Generate Mist;But If The Water Depth Is Too High,The Mist Is Small Or Even No Mist Generated. Please Refer To The Following Drawing No.2 For The Best Water Lever. The Mist Maker Shall Generate Calori When It Is Working,The Water Temperature Shall Be Rising,Recommend To Use It In A Big Volume Or A Good Radiating Water Container. Place The Transformer In A Drafty Place,And Far Away Moist Place. Connect The Mist Maker With The Transformer Properly. Plug The Transformer Into Power Supply And Electrify,If It Is Correctly Installed, It Will Start To Work Immediately. Parameter Limited Temperature:5~40 C Water Rate:>350Ml/H Depth Of Water Limited :45~65Mm Rate Voltage :15W Products Include: 1*Mist Maker(Not With Key) 1*Power Click On The Shopping Cart To Make A Purchase, Make Your Halloween Different, And Give Your Friends A Big Surprise.
Frequently Asked Questions
Q: How does the Akeydeco Halloween Party Mist Maker work?A: The Akeydeco Halloween Party Mist Maker uses ultrasonic technology to create a fine mist. When placed in water and connected to a power supply, it vaporizes the water, producing a fog effect enhanced by its LED lights.
Q: What are the key features of this mist maker?A: This mist maker includes 9 LED lights that can flash in red, blue, and yellow, creating a colorful lighting effect. It has a high aerosolized output of at least 350 mL/H, making it suitable for various applications such as indoor fountains, fish tanks, and outdoor decorations.
Q: Is the mist maker safe to use indoors?A: Yes, the Akeydeco Mist Maker operates at a safe voltage of 24V, making it suitable for indoor use. However, ensure that the transformer is placed in a dry area and away from excessive moisture.
Q: What is the recommended water level for optimal performance?A: For the best results, the water level should be between 45mm and 65mm deep. Too little water will prevent mist generation, while too much water may reduce mist output.
Q: Can I use the mist maker with different types of water containers?A: Yes, the mist maker can be used in various water containers, such as ponds, vases, and birdbaths. Ensure the container allows for proper immersion of the device to facilitate mist production.
⚠️ California Proposition 65 Warning: Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visitwww.P65Warnings.ca.gov.