Some products sold on this website may expose you to chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm, including
wood dust, formaldehyde, and certain lacquers or finishes.
Always follow the included assembly instructions. Ensure all bolts and fittings are
fully tightened before use. Do not exceed the stated maximum weight capacity.
Keep children away during assembly. Inspect hardware periodically and re-tighten as needed.
ℹ️
Material & Finish Notice
Wood tones and fabric colors may vary slightly from images due to natural material
variation and screen calibration. Surface finishes may require periodic maintenance
to preserve appearance and longevity.
Made with care
Great value
Elegant design
Quality materials
Description
Installation Steps Step 1: Roughly Measure The Area You Will Be Covering And Transfer The Measurements To The Back Side Of The Contact Paper. Grid Lines Are Marked On The Back Of The Contact Paper To Assist You In Measuring Accurately. Cut The Contact Paper To The Measured Size. Step 2: Peel Away Approximately 1 Inch Of The Backing Paper. Line Up The Exposed Contact Paper With One Edge Of The Apply Surface. Press Down Lightly To Bond The Paper And The Surface Together. Step 3: Smooth The Paper From The Center Outward, Working Toward Both The Left And The Right. Grip The Backing Paper That Is Peeled Away And Pull Slightly So That The Backing Comes Off Little By Little While You Press The Paper Down. Step 4: If There Is A Bubble Under The Paper, You Can Use A Pin To Poke A Tiny Hole In The Bubble, And Smooth Down From The Edges Of The Bubble Toward The Hole To Smooth Out Air Bubbles Under Contact Paper.
⚠️ California Proposition 65 Warning: Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visitwww.P65Warnings.ca.gov.