Some products sold on this website may expose you to chemicals known to the State of
California to cause cancer, birth defects, or other reproductive harm, including
wood dust, formaldehyde, and certain lacquers or finishes.
Always follow the included assembly instructions. Ensure all bolts and fittings are
fully tightened before use. Do not exceed the stated maximum weight capacity.
Keep children away during assembly. Inspect hardware periodically and re-tighten as needed.
ℹ️
Material & Finish Notice
Wood tones and fabric colors may vary slightly from images due to natural material
variation and screen calibration. Surface finishes may require periodic maintenance
to preserve appearance and longevity.
Made with care
Great value
Elegant design
Quality materials
Description
The Netbell-2-2Lbel Is A One-Stop, Affordable Diy Low Voltage Solution For Schools, Factories, Industrial Facilities, Warehouses To Build A Fully Automated Web-Based Timed Alert System For Signaling Shift Changes, Breaks And Any Other Timed Signal Applications In Areas Of High Ambient Noise Levels. This Extra Loud Bell Kit Is Loud Enough To Be Heard Over Equipment And Wont Have The Same Sound As Some Industrial Equipment Or A Fire Alarm. The Kit Includes One Netbell-2 Web-Based Bell Controller, Two High Quality 6 Inch High Output Bells (92Dba @10') , Each Bell Can Cover Up To 20,000Sqf Area At A Normal Background Noise Level, Two 24Vac Power Supply To Power The Bells, Two 10Ft Power Cables. The Bells Can Be Wired At Up To 250 Feet Away With 18Awg Cable (500 Feet With 16Awg Cable) To The Netbell-2 Controller, You Will Have Everything Needed For Installation And Operation.The Netbell-2 Web-Based Bell Controller Is Built On A Tcp/Ip Platform With A Built-In Web Server And Special Software Designed For Scheduling A Bell System. With The Built-In Web Interface, You Can Access, Control And Schedule Bells Over A Network Or The Internet, No Additional Software Or Designated Computer Required. With The Special Designed Easy-To-Use Bellscheduler Desk App, Manage & Schedule Multiple Netbell Devices In A Few Clicks, Making The Management Of Your Bell Systems Incredibly Easy. With The Digital Inputs You Can Wire A Push Switch For Ringing Bells Manually. It'S Ready To Go Out Of The Box, And You Need Only Connect The Unit To Power 12Vdc Or Poe And Network With The Provided Cable; It Can Be Connected Anywhere On The Network And Does Not Require A Direct Connection To A Pc. Scheduling And Setup Are Accessed Through Any Standard Web Browser Or The Bellscheduler Desk App.For Those Who Wish To Forego Networking The Netbell-2, It Is Also Able To Function As A Standalone Device. Connect The Unit To A Pc, Upload Bell Schedules, Then Disconnect, And It Will Function As Scheduled.
⚠️ California Proposition 65 Warning: Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visitwww.P65Warnings.ca.gov.