What are the dimensions of the bath tub splash guard?

The bath tub splash guard measures nine inches in width and ten and three-quarters inches in height. This size is designed for efficient water deflection in standard tub installations.

What material is the splash guard made from?

The splash guard is constructed from rigid plastic. This durable material is designed to withstand moisture and provide long-lasting performance.

What is the weight of the splash guard?

The weight of the splash guard is not specified. However, it is lightweight and easy to handle for installation.

How do I install the splash guard?

To install the splash guard, clean the mounting area thoroughly and apply a silicone adhesive. Then, press the guard into place and allow twenty-four hours for curing before exposing it to moisture.

Is this splash guard suitable for tight corners?

Yes, this splash guard is designed for tight-fitting corner installations. It features a ninety-degree angle for optimal placement in corners.

Can I use any adhesive for installation?

It is recommended to use clear or white silicone-based adhesive for installation. Adhesive is not included and must be purchased separately.

How do I clean the splash guard?

You can clean the splash guard with a mild soap solution and a soft cloth. Avoid abrasive cleaners that could scratch the plastic surface.

What should I do if the splash guard arrives damaged?

If the splash guard arrives damaged, contact the seller for a return or replacement. Ensure to keep all packaging for easier processing.

Is the splash guard adjustable?

No, the splash guard is non-adjustable. It is designed as a rigid, corner-fitting solution for specific installations.

Will this splash guard match my tub color?

Yes, the splash guard is white in color, which matches most tub finishes. This helps it blend seamlessly with your bathroom decor.

What kind of surfaces can I install the splash guard on?

The splash guard can be installed on clean wall and tub surfaces. It is essential to ensure surfaces are free of dirt and moisture.

How long does the adhesive need to cure?

The adhesive should cure for twenty-four hours before the splash guard is exposed to moisture. This allows for a strong, permanent bond.

Is this product safe for use in homes with children?

Yes, the splash guard is safe for use in homes with children. It helps prevent water spills that can create slippery floors, enhancing safety.

Can I use this splash guard in a shower?

Yes, this splash guard is suitable for use in both bathtubs and shower enclosures. Its design helps redirect excess water back into the tub.

What is the model number of the splash guard?

The model number of the splash guard is M6086. This designation helps in identifying the specific product for installation or replacement.

Prime-Line M 6086 Bath Tub Splash Guard, 9 In. X 10-3/4 In., Plastic, White

$16.16 $23.09

Prime-Line M 6086 Bath Tub Splash Guard, 9 In. X 10-3/4 In., Plastic, White

Name: Prime-Line M 6086 Bath Tub Splash Guard, 9 In. X 10-3/4 In., Plastic, White
Brand: Prime-Line
SKU: WBHOMB00E4BH5DG
Price: 16.16 USD
Availability: InStock

$16.16 $23.09

SKU: WBHOMB00E4BH5DG

UPC: 049793060860

Brand: Prime-Line

Availability: In Stock

Sold by Selectfurniturestore, an authorized reseller.

Returns accepted within 30 days | support@selectfurniturestore.com

✓ Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–7 business days after dispatch
Heavy items are freight-shipped & carefully secured to prevent damage
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 30 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · Item must be unassembled & in original packaging

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@selectfurniturestore.com +1 832-957-9318

View Full Return & Refund Policy

Safety & Compliance

Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm, including wood dust, formaldehyde, and certain lacquers or finishes.

www.P65Warnings.ca.gov

Always follow the included assembly instructions. Ensure all bolts and fittings are fully tightened before use. Do not exceed the stated maximum weight capacity.

Keep children away during assembly. Inspect hardware periodically and re-tighten as needed.

Wood tones and fabric colors may vary slightly from images due to natural material variation and screen calibration. Surface finishes may require periodic maintenance to preserve appearance and longevity.

Made with care

Great value

Elegant design

Quality materials

Description

Product Descriptionthese White Bath Tub Splash Guards Are Constructed Of Rigid Plastic And Include A Left And Right Corner Piece. Each Piece Features A Water-Deflecting Wing Which Curves In 2-3/8 Inches Towards The Tub, Designed To Redirect Flow Of Excess Water Back Into The Tub. These Rigid, Non-Adjustable, Corner-Fitting Splash Guards Come With A 90 Degree Angle, Designed For Tight-Fitting Corner Installations. These Splash Guards Are Best Installed With A Clear Or White Silicone-Based Adhesive Product, But Wall And Tub Surfaces Should Be Cleaned Prior With Alcohol To Provide For A Clean And Permanent Bond. Silicone Adhesive Is Not Provided With This Item And Must Be Purchased Separately. Application Of Silicone Adhesives Should Be Followed As Per Manufacturers Instructions. *Installation Tip: Once Surfaces Has Been Cleaned And Splash Guards Have Been Set In Place With Silicone, Allow 24 Hours For Curing Prior To Exposing To Moisture.From The Manufacturerthese Splash Guards Are Constructed From White Plastic. They Feature A Curved Edge Design And Include 1 Left And 1 Right Hand Guard. A Adhesive Tub Caulk Or Mastic Is Recommended For Installation.

Frequently Asked Questions

Q: What are the dimensions of the bath tub splash guard? A: The bath tub splash guard measures nine inches in width and ten and three-quarters inches in height. This size is designed for efficient water deflection in standard tub installations.
Q: What material is the splash guard made from? A: The splash guard is constructed from rigid plastic. This durable material is designed to withstand moisture and provide long-lasting performance.
Q: What is the weight of the splash guard? A: The weight of the splash guard is not specified. However, it is lightweight and easy to handle for installation.
Q: How do I install the splash guard? A: To install the splash guard, clean the mounting area thoroughly and apply a silicone adhesive. Then, press the guard into place and allow twenty-four hours for curing before exposing it to moisture.
Q: Is this splash guard suitable for tight corners? A: Yes, this splash guard is designed for tight-fitting corner installations. It features a ninety-degree angle for optimal placement in corners.
Q: Can I use any adhesive for installation? A: It is recommended to use clear or white silicone-based adhesive for installation. Adhesive is not included and must be purchased separately.
Q: How do I clean the splash guard? A: You can clean the splash guard with a mild soap solution and a soft cloth. Avoid abrasive cleaners that could scratch the plastic surface.
Q: What should I do if the splash guard arrives damaged? A: If the splash guard arrives damaged, contact the seller for a return or replacement. Ensure to keep all packaging for easier processing.
Q: Is the splash guard adjustable? A: No, the splash guard is non-adjustable. It is designed as a rigid, corner-fitting solution for specific installations.
Q: Will this splash guard match my tub color? A: Yes, the splash guard is white in color, which matches most tub finishes. This helps it blend seamlessly with your bathroom decor.
Q: What kind of surfaces can I install the splash guard on? A: The splash guard can be installed on clean wall and tub surfaces. It is essential to ensure surfaces are free of dirt and moisture.
Q: How long does the adhesive need to cure? A: The adhesive should cure for twenty-four hours before the splash guard is exposed to moisture. This allows for a strong, permanent bond.
Q: Is this product safe for use in homes with children? A: Yes, the splash guard is safe for use in homes with children. It helps prevent water spills that can create slippery floors, enhancing safety.
Q: Can I use this splash guard in a shower? A: Yes, this splash guard is suitable for use in both bathtubs and shower enclosures. Its design helps redirect excess water back into the tub.
Q: What is the model number of the splash guard? A: The model number of the splash guard is M6086. This designation helps in identifying the specific product for installation or replacement.