What are the dimensions of the ShelterLogic MaxAP Canopy Replacement Cover?

The dimensions are ten feet by twenty feet. This cover is designed specifically for a ten-foot by twenty-foot shelter frame.

What material is the ShelterLogic MaxAP Canopy Replacement Cover made of?

The cover is made of polyethylene. This heavy-duty material is UV-treated for durability against sunlight.

Is the ShelterLogic MaxAP Canopy Replacement Cover suitable for a specific frame size?

Yes, it is suitable for a frame size of ten feet by twenty feet. The cover is compatible with shelters that have a frame diameter of one and three-eighths inches.

How do I install the ShelterLogic MaxAP Canopy Replacement Cover?

To install the cover, first remove the old cover from the frame. Then, place the new cover over the frame and secure it using the provided hooks or straps.

Can I use this replacement cover for a different size frame?

No, it is not suitable for different sizes. This cover is specifically designed for a ten-foot by twenty-foot frame.

What is the best way to secure the canopy cover?

Use the heat-welded valanced design for a secure fit. Make sure to fasten all straps tightly to prevent flapping in the wind.

How should I clean the ShelterLogic MaxAP Canopy Replacement Cover?

Clean it with mild soap and water. Rinse thoroughly and allow it to dry completely before folding or storing.

Is this replacement cover resistant to UV rays?

Yes, the cover is UV-treated. This treatment helps protect it from sun damage and prolongs its lifespan.

Can I leave the canopy cover outside during rain?

Yes, it can withstand rain, but it's advisable to remove it during severe weather. Prolonged exposure to heavy rain can cause water pooling and damage.

What should I do if my replacement cover arrives damaged?

Contact customer support immediately for assistance. They will guide you through the return or exchange process.

Does the replacement cover come with a warranty?

Yes, it typically comes with a manufacturer's warranty. Check the packaging or product details for specific terms.

How much does the ShelterLogic MaxAP Canopy Replacement Cover weigh?

The cover weighs approximately five pounds. This lightweight design makes it easy to handle during installation.

Is the ShelterLogic MaxAP Canopy Replacement Cover easy to store?

Yes, it is easy to store. Fold it neatly and keep it in a dry place when not in use to maintain its condition.

Can I use this cover for commercial purposes?

Yes, it can be used for commercial purposes. Its heavy-duty design makes it suitable for various outdoor applications.

Is the replacement cover available in different colors?

No, it is only available in white. This color reflects sunlight and helps keep the area underneath cooler.

Shelterlogic Maxap Canopy Replacement Cover, White, 10 X 20 Ft.

$126.67 $180.96

Shelterlogic Maxap Canopy Replacement Cover, White, 10 X 20 Ft.

Name: Shelterlogic Maxap Canopy Replacement Cover, White, 10 X 20 Ft.
Brand: Shelterlogic
SKU: WBPLGB001G7Q1YK
Price: 126.67 USD
Availability: InStock

$126.67 $180.96

SKU: WBPLGB001G7Q1YK

UPC: 024200007409

Brand: Shelterlogic

Availability: In Stock

Sold by Selectfurniturestore, an authorized reseller.

Returns accepted within 30 days | support@selectfurniturestore.com

✓ Verified

Shipping Information

Free Standard Shipping — United States only
Processing Time: 1–3 business days
Estimated Delivery: 3–7 business days after dispatch
Heavy items are freight-shipped & carefully secured to prevent damage
Tracking number sent via email once dispatched
Orders over $250 require signature upon delivery. Taxes calculated at checkout.

Returns & Refund

Returns accepted within 30 days of delivery.

Damaged or Defective Item

Free return shipping + replacement or full refund

Wrong Item Received

Free return shipping + replacement or full refund

Change of Mind

Return shipping at customer's expense · Item must be unassembled & in original packaging

All returns require a Return Authorization (RA) number before sending.

To initiate a return, contact us:

support@selectfurniturestore.com +1 832-957-9318

View Full Return & Refund Policy

Safety & Compliance

Some products sold on this website may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm, including wood dust, formaldehyde, and certain lacquers or finishes.

www.P65Warnings.ca.gov

Always follow the included assembly instructions. Ensure all bolts and fittings are fully tightened before use. Do not exceed the stated maximum weight capacity.

Keep children away during assembly. Inspect hardware periodically and re-tighten as needed.

Wood tones and fabric colors may vary slightly from images due to natural material variation and screen calibration. Surface finishes may require periodic maintenance to preserve appearance and longevity.

Made with care

Great value

Elegant design

Quality materials

Description

10X20 Canopy White Replacement Cover For 1-38 Inches Frame

Frequently Asked Questions

Q: What are the dimensions of the ShelterLogic MaxAP Canopy Replacement Cover? A: The dimensions are ten feet by twenty feet. This cover is designed specifically for a ten-foot by twenty-foot shelter frame.
Q: What material is the ShelterLogic MaxAP Canopy Replacement Cover made of? A: The cover is made of polyethylene. This heavy-duty material is UV-treated for durability against sunlight.
Q: Is the ShelterLogic MaxAP Canopy Replacement Cover suitable for a specific frame size? A: Yes, it is suitable for a frame size of ten feet by twenty feet. The cover is compatible with shelters that have a frame diameter of one and three-eighths inches.
Q: How do I install the ShelterLogic MaxAP Canopy Replacement Cover? A: To install the cover, first remove the old cover from the frame. Then, place the new cover over the frame and secure it using the provided hooks or straps.
Q: Can I use this replacement cover for a different size frame? A: No, it is not suitable for different sizes. This cover is specifically designed for a ten-foot by twenty-foot frame.
Q: What is the best way to secure the canopy cover? A: Use the heat-welded valanced design for a secure fit. Make sure to fasten all straps tightly to prevent flapping in the wind.
Q: How should I clean the ShelterLogic MaxAP Canopy Replacement Cover? A: Clean it with mild soap and water. Rinse thoroughly and allow it to dry completely before folding or storing.
Q: Is this replacement cover resistant to UV rays? A: Yes, the cover is UV-treated. This treatment helps protect it from sun damage and prolongs its lifespan.
Q: Can I leave the canopy cover outside during rain? A: Yes, it can withstand rain, but it's advisable to remove it during severe weather. Prolonged exposure to heavy rain can cause water pooling and damage.
Q: What should I do if my replacement cover arrives damaged? A: Contact customer support immediately for assistance. They will guide you through the return or exchange process.
Q: Does the replacement cover come with a warranty? A: Yes, it typically comes with a manufacturer's warranty. Check the packaging or product details for specific terms.
Q: How much does the ShelterLogic MaxAP Canopy Replacement Cover weigh? A: The cover weighs approximately five pounds. This lightweight design makes it easy to handle during installation.
Q: Is the ShelterLogic MaxAP Canopy Replacement Cover easy to store? A: Yes, it is easy to store. Fold it neatly and keep it in a dry place when not in use to maintain its condition.
Q: Can I use this cover for commercial purposes? A: Yes, it can be used for commercial purposes. Its heavy-duty design makes it suitable for various outdoor applications.
Q: Is the replacement cover available in different colors? A: No, it is only available in white. This color reflects sunlight and helps keep the area underneath cooler.